|
|
| Amphibious ATVs (AATV) have been making a comeback in the past few years for their ability to go where few other machines can make it through. Manufacturers of Max, Argo and others have survived and improved their machines and their capabilities, leaving the older AATV's of questionable reliability behind to history. These machines were the first ATVs on the market back in the 1970's. Many quad and side by side ATV owners are moving toward the water capabilities of the AATV (6x6) and our accessories can truly make these machines adaptable for all weather use. |
|
MAX IV Winch Mount Plate: This winch mounting plate does NOT require removal of the gas tank on your Max IV. Spreads the pulling point across the nose of the unit helping to eliminate cracking of the HDPE body of your AATV. This design allows both a vertical mount winch or a horizontal mount winch to be used. Specifications: • 24" wide, 1/4" thick winch plate
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
 |
MAX IV Brush Guards: Helps protect the front corners and headlights on your Max IV. Specifications: • Measures 19" wide and 9" tall.
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
 |
MAX IV Front Cargo Rack: Designed to extend the cargo capabilities of your Max IV AATV. Specifications: • Measures 45" wide by 16" deep.
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
|
MAX IV Windshield: Easy to remove when needed. Marine Grade Hook and Loop fasteners provide a secure hold. 3/16" thick polycarbonate is scratch resistant and will flex on impact. Specifications: • 26" high by 43" wide
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
|
MAX IV Rear Cargo Rack: This rack is easily removed to be able to service your Max IV by removing 4 pins. Built for heavy duty use, this rack extends the cargo holding area of your AATV. Specifications: • 1" angle frame with 11 gauge welded wire mesh
on 1" spacing. Will fit Briggs, Kohler and other models with normal engine compartment covers. Kawaski engine models may require a taller support leg bracket. Call us at 1-800-335-1880 with your measurement.
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
 |
MAX IV Lightweight Cab Frame: Designed for Max IV owners who want a cab on their AATV, but do not want the weight of a roll bar. Specifications: • 1" galvanized tube slips together and bolts securely
(drilling required) This is NOT a Roll Bar and Provides NO Roll Over Protection!
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
|
MAX IV All Weather Cab: Designed for use with our Lightweight Cab Frame or can be used with a Max IV factory roll bar. NO snaps or zippers to freeze up or corrode. Marine Grade Hook and Loop Fastener System allows you to roll up the windows or remove them completely in warm weather. Specifications: • Light Tan Color Only
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
|
Universal AATV Snow Plow: This snow plow is designed for use with our Snow Plow Mount Rails (shown below) or can be adapted for use with Attex, Hustler, Argo and other AATV by cutting the rear mount extensions. Adjustable mounting width from 29" to 41". Specifications: • 72" wide Snow Blade by 15 1/2" high * Requires a winch to raise and lower the snow plow.
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |
|
|
MAX IV Snow Plow Mount Rails: Allows you to mount a snow plow on the Max IV. Can be used with wheel extensions and bearing cages. If used with snow-tracks, these rails must be mounted against the body tub. Specifications: • 4" wide, 1/4" thick and 48" long.
Orders to Alaska, Hawaii and Canada, please call us at 1-800-335-1880 for a shipping quote. |